5 TON (208-230/1/60) BREWERY CHILLER SPECIFICATION

5.0 Nominal Ton – CAVCS0501-BC
208-230/1/60

Brewery Chiller For 28F Degree Water / Glycol Mixture

Standard Features

  • Heavy duty welded, tubular steel frame with high gloss powder coat finish and laminated aluminum cabinet
  • U.L. Listed, and EPA Compliant, eco-friendly R410a refrigeration condensing unit
  • Single refrigeration circuit with Copeland scroll compressor(s) with crankcase heater(s)
  • Refrigerant receiver and suction side accumulator to eliminate refrigerant slugging in compressor
  • Air cooled, high ambient, vertical discharge, condensers for 100°F ambient with fan cycle low ambient control
  • Weather proof electrical panel with single point power connection
  • 24 vac control circuit with component sequenced terminal strip for easy troubleshooting
  • Remote control panel for indoor installation provides lighted on/off switches and digital thermostat
  • UL and ASME stainless steel brazed plate evaporator insulated against condensation with 1/2″ closed cell insulation
  • Auto reset low pressure safety; manual reset high pressure safety
  • Externally equalized thermal expansion valve, liquid line filter drier, and sight glass
  • Low water flow compressor interlock safety locks out compressors in low flow condition
  • Non-ferrous water lines with FPT connections insulated with 1/2” closed cell insulation
  • High density, polyethylene reservoir insulated with 1/2” closed cell insulation
  • High head centrifugal process pump rated at 40 psi at 2.5 GPM/ton
  • Internal bypass valve for temperature stability and to prevent pump dead heading.
  • Systems leak checked, pressure tested, run tested under load and shipped operation ready
  • Warranty: one (1) year limited parts, five (5) years limited compressor warranty
  • Ships fully crated to minimize damage risk during shipping

Options & Accessories

  • Condenser coil coating for corrosion protection in salt air environments
  • Flooded condenser to maintain head pressure in below zero ambient
  • Voltage and phase monitor in 2 through 7.5 ton
  • Cabinet mounted fluid pressure and temperature gauges and refrigeration pressure gauge
  • Inhibited propylene glycol concentrate or 65% / 35% premix in 55 gallon drums or 5 gallon carboys
  • Magnum microprocessor controller
  • Dual pumps with lead/lag control
  • Castors for portability
  • R407c and R404a refrigerants

download-now-button

Recirculating---Air-Cooled-Chiller-(with-Tank-and-Pump)

Electrical Data
Power Supply:  208-230/1/60
Compressor: LRA: 135 Amps
RLA: 25.3 Amps
Fan Motor: FLA: 1 @ .1.2 Amps
Pump Motor  H.P. 1.0
  FLA: 8.0 Amps
Total Circuit: FLA: 34.5 Amps
MOP: 50 Amps

 

Physical Data
Dimensions: 48”L x 35”W x 68”H
Ship  Weight: 935 lbs.
Minimum Clearances: 30” All Sides   60” above Top
Noise Rating: 77 dBA @ 10 feet
Fans CFM: 3295 cfm @ 125°F
Tank Capacity: 40 Gallons ( Atmospheric )
Connections: 1” FPT CHWS and CHWR

Information provided is subject to change at manufacturers discretion. Submittals available upon request with purchase order.

We may use cookies (and other technology) for constant improvement of our website, to personalize content to you, and may use cookies to deliver advertising messages and offers that we believe are relevant. For a detailed cookie policy or to change your cookie preferences, see our Detailed Policy.