Air Cooled Cold Plunge Chiller CPPC0151

1.5 TONS | CPPC0151 | 208-230/1/60

Standard Features

  • 16 ga. Galvanized steel cabinet with high gloss powder coat finish
  • Cabinet mounted chilled water supply pressure and temperature gauges
  • U.L. Listed, and EPA Compliant, R-404a refrigeration suitable for outdoors installation
  • Copeland scroll compressor with crankcase heater and discharge safety thermostat
  • Air cooled, high ambient, horizontal discharge condenser with EC high efficiency fan motor
  • Receiver ( 12 lb. ) with outlet shutoff valve and pressure safety
  • Single point power connection into weather proof electrical panel
  • Phase and voltage monitor guards against loss of phase, phase reversal
  • 240 vac control circuit with digital, electronic thermostat, compressor anti, short-cycle time delay, water flow safety switch lockout, high and low refrigeration pressure safety lockout switches, com-pressor anti short-cycle timer
  • Stainless steel nickel brazed evaporator with hot gas bypass capacity control
  • Liquid line specialties include externally equalized thermal expansion valve with liquid line solenoid valve, filter drier, and sight glass
  • Non ferrous water lines with 1-1/4” FPT connections are insulated with 1/2” closed cell to prevent condensation
  • System is extensively leak checked, pressure tested, and put under a deep vacuum, charged with refrigerant, and then run tested under load prior to shipment so it is ready for operation when re-ceived
  • The system and all parts are warranted to be free of manufactured defects for a period of thirteen months ( 13 ) year from date of shipment

Options & Accessories

  • Condenser coil coating for corrosion protection in coastal areas
  • Split system refrigeration with condensing unit outdoors and indoor chiller
  • Heated & insulated receiver in condensing unit for cold weather operation
  • Full cabinet corrosion protection with 5 year warranty
  • Marine grade chiller heat exchanger for salt water pools
  • Factory authorized technician for startup and training
  • Factory authorized contractor for installation
  • Other voltages and options available; consult the factory

download-now-button

Electrical Data
Power Supply:  208-230/1/60
Compressor: LRA: 1 @ 49 Amps
RLA: 9.4 Amps
Fan Motor: FLA: 1.2 Amps
Total Circuit: FLA: 11.1 Amps
MCA: 13.5 Amps
MOP: 20 Amps

 

Physical Data
Dimensions: 48-1/8”L x 16 5/8”D x 29-1/4”H
Ship  Weight: 530 lbs.
Condenser Clearance: 6” on condenser air Inlet Side
Other Sides Clearance: 30” on electrical access and fan dis-charge
Sound Rating @ 10 ft.: 58 dBA with cabinet insulation
61 dBA without cabinet insulation
Connections: 1-1/4” FPT CHWS and CHWR

We may use cookies (and other technology) for constant improvement of our website, to personalize content to you, and may use cookies to deliver advertising messages and offers that we believe are relevant. For a detailed cookie policy or to change your cookie preferences, see our Detailed Policy.