American Chillers and Cooling Tower Systems

Manufacturer of industrial process chillers
for medical, dry cleaning, aerospace,
food processing and more...

More about us >>

Air Cooled Cold Plunge Chiller CPPC0301

3.0 TONS | CPPC0301 | 208-230/1/60

Standard Features

  • The Ultra Quiet chillers is suitable for outdoor installation with 6” clearance
  • Space saving Chiller can be wall mounted
  • 16 ga. Galvanized steel cabinet with high gloss powder coat finish
  • Cabinet mounted chilled water supply pressure and temperature gauges
  • U.L. Listed, and EPA Compliant, R-404a refrigeration suitable for outdoors installation
  • Copeland scroll compressor with crankcase heater and discharge safety thermostat
  • Air cooled, high ambient, horizontal discharge condenser with EC high efficiency fan motor
  • Receiver ( 12 lb. ) with outlet shutoff valve and pressure safety
  • Single point power connection into weather proof electrical panel
  • Phase and voltage monitor guards against loss of phase, phase reversal
  • 240 vac control circuit with digital, electronic thermostat, compressor anti, short-cycle time delay, water flow safety switch lockout, high and low refrigeration pressure safety lockout switches, com-pressor anti short-cycle timer
  • Stainless steel nickel brazed evaporator with hot gas bypass capacity control
  • Liquid line specialties include externally equalized thermal expansion valve with liquid line solenoid valve, filter drier, and sight glass
  • Non ferrous water lines with 1-1/4” FPT connections are insulated with 1/2” closed cell to prevent condensation
  • System is extensively leak checked, pressure tested, and put under a deep vacuum, charged with refrigerant, and then run tested under load prior to shipment so it is ready for operation when re-ceived
  • The system and all parts are warranted to be free of manufactured defects for a period of thirteen months ( 13 ) year from date of shipment

Options & Accessories

  • Condenser coil coating for corrosion protection in coastal areas
  • Split system refrigeration with condensing unit outdoors and indoor chiller
  • Heated & insulated receiver in condensing unit for cold weather operation
  • Full cabinet corrosion protection with 5 year warranty
  • Marine grade chiller heat exchanger for salt water pools
  • Factory authorized technician for startup and training
  • Factory authorized contractor for installation
  • Other voltages and options available; consult the factory

download-now-button

Electrical Data
Power Supply:  208-230/1/60
Compressor: LRA: 1 @ 105 Amps
RLA: 17.1 Amps
Fan Motor: FLA: 1.7 Amps
Total Circuit: FLA: 18.7 Amps
MCA: 23.1 Amps
MOP: 40 Amps

 

Physical Data
Dimensions: 48-1/8”L x 16 5/8”D x 29-1/4”H
Ship  Weight: 530 lbs.
Condenser Clearance: 6” on Inlet Side
Other Sides Clearance: 30” on electrical access and fan dis-charge
Sound Rating @ 10 ft.: 58 dBA with cabinet insulation
61 dBA without cabinet insulation
Connections: 1-1/4” FPT CHWS and CHWR