American Chillers and Cooling Tower Systems

Manufacturer of industrial process chillers
for medical, dry cleaning, aerospace,
food processing and more...

More about us >>

Cold Plunge Pool Chiller – For Chlorine Treated Pools SPPC0151

1.5 Ton – SPPC0151 – 208-230/1/60

Standard Features

  • U.L. Listed, and EPA Compliant, R410a eco-friendly refrigeration complies with latest codes
  • Single refrigeration circuit with separate and independent thermostat controls and safeties
  • Air cooled, high ambient, vertical discharge, condensers for 100°F ambient
  • Suitable for outdoor installation (for areas that maintain outdoor temperatures above freezing)
  • Weather proof electrical panel with single point power connection to distribution block
  • Voltage and phase monitor protection for low voltage, phase loss and phase reversal with alarm light
  • 24 vac control circuit with component sequenced terminal strip for easy troubleshooting
  • One stage of compressor control with digital, electronic thermostat
  • Remote control panel with electronic thermostat, lighted pushbutton on/off switches,
  • Cupranickel heat exchanger for chlorine pools
  • Externally equalized thermal expansion valves with liquid line solenoid valves, filter driers, sight glasses
  • Non ferrous water lines with FPT connections and insulated with 1/2” closed cell insulation
  • Water flow safety switch locks out compressors on low flow to evaporator
  • Heavy welded steel frame with powder coated corrosion protection
  • Cabinet mounted chilled water supply pressure and temperature gauges
  • Laminated polyethylene cabinet panels with brushed aluminum finish
  • Warranty: One ( 1 ) years limited parts, five ( 5 ) years limited compressor warranty
  • Systems leak checked, pressure tested, and run tested under load prior to shipment so it is ready for operation

Options & Accessories

  • Split system for outdoor condenser installation (for areas that have outdoor temperatures below freezing.
  • Cabinet mounted, glycerin filled refrigeration pressure gauges
  • Castors for portability
  • Factory authorized technician for startup, training & service
  • Factory authorized contractor for installation
  • Condenser coil coating for corrosion protection in coastal areas
  • Marine grade chiller heat exchanger for saltwater pools
  • Other voltages and options available upon request


Chiller with tank and pump davp0201

Electrical Data
Power Supply:  208-230/1/60
Compressor: LRA: 1 @ 40.3 Amps
RLA: 7.7 Amps
Total Circuit: FLA: 8.7 Amps
MCA: 11 Amps
MOP: 15  Amps


Physical Data
Dimensions: 26”L x 27”W x 48”H
Ship  Weight: 260 lbs.
Minimum Clearances: 30” All Sides   120” above Top
Noise Rating 77 dBA @ 10 feet
Fans CFM: 2805 cfm @ 125°F
Connections: .75” FPT CHWS and CHWR