Cold Plunge Pool Chiller – For Chlorine Treated Pools SPPC0501

5.0 Ton – SPPC0501 – 208-230/1/60

Standard Features

  • U.L. Listed, and EPA Compliant, R410a eco-friendly refrigeration complies with latest codes
  • Single refrigeration circuit with separate and independent thermostat controls and safeties
  • Air cooled, high ambient, vertical discharge, condensers for 100°F ambient
  • Suitable for outdoor installation (for areas that maintain outdoor temperatures above freezing)
  • Weather proof electrical panel with single point power connection to distribution block
  • Voltage and phase monitor protection for low voltage, phase loss and phase reversal with alarm light
  • 24 vac control circuit with component sequenced terminal strip for easy troubleshooting
  • One stage of compressor control with digital, electronic thermostat
  • Remote control panel with electronic thermostat, lighted pushbutton on/off switches,
  • Cupranickel heat exchanger for chlorine pools
  • Externally equalized thermal expansion valves with liquid line solenoid valves, filter driers, sight glasses
  • Non ferrous water lines with FPT connections and insulated with 1/2” closed cell insulation
  • Water flow safety switch locks out compressors on low flow to evaporator
  • Heavy welded steel frame with powder coated corrosion protection
  • Cabinet mounted chilled water supply pressure and temperature gauges
  • Laminated polyethylene cabinet panels with brushed aluminum finish
  • Warranty: One ( 1 ) years limited parts, five ( 5 ) years limited compressor warranty
  • Systems leak checked, pressure tested, and run tested under load prior to shipment so it is ready for operation

Options & Accessories

  • Split system for outdoor condenser installation (for areas that have outdoor temperatures below freezing.
  • Cabinet mounted, glycerin filled refrigeration pressure gauges
  • Castors for portability
  • Factory authorized technician for startup, training & service
  • Factory authorized contractor for installation
  • Condenser coil coating for corrosion protection in coastal areas
  • Marine grade chiller heat exchanger for saltwater pools
  • Other voltages and options available upon request

download-now-button

Chiller with tank and pump davp0201

Electrical Data
Power Supply:  208-230/1/60
Compressor: LRA: 1 @ 134 Amps
RLA: 26.4 Amps
Fan Motors FLA 1 @ 1.2 Amps
Total Circuit: FLA: 27.6 Amps
MCA: 34.7 Amps
MOP: 40  Amps

 

Physical Data
Dimensions: 31-5/8”L x 31-5/8”W x 56”H
Ship  Weight: 468 lbs.
Minimum Clearances: 30” All Sides   120” above Top
Noise Rating 88 dBA @ 10 feet
Fans CFM: 3570 cfm @ 125°F
Connections: 1.00” FPT CHWS and CHWR

We may use cookies (and other technology) for constant improvement of our website, to personalize content to you, and may use cookies to deliver advertising messages and offers that we believe are relevant. For a detailed cookie policy or to change your cookie preferences, see our Detailed Policy.