3.0 Ton – DAVP0304 – 460/3/3/60
Standard Features
- Heavy duty welded, tubular steel frame with high gloss powder coat finish and laminated polyethylene cabinet
- U.L. Listed, and EPA Compliant, eco-friendly R410a refrigeration condensing unit
- Single refrigeration circuit with Copeland scroll compressor with crankcase heater
- Air cooled, high ambient, vertical discharge, condensers for 100°F ambient with fan cycle control
- Weather proof electrical panel with single point power connection and 24 vac control circuit
- Remote control panel for indoor installation provides lighted on/off switches and digital thermostat
- High performance coaxial evaporator with inner copper tubing and protective steel shell. UL and ASME listed coil is insulated against condensation with expanded foam
- Externally equalized thermal expansion valve, liquid line filter drier, and sight glass
- Low water flow compressor interlock safety locks out compressors in low flow condition
- Non-ferrous water lines with FPT connections insulated with 1/2” closed cell insulation
- High density, polyethylene reservoir insulated with 1/2” closed cell insulation
- High head centrifugal process pump rated at 40 psi at 2.5 GPM/ton
- Warranty: one ( 1 ) years limited parts, five ( 5 ) years limited compressor warranty
- Systems leak checked, pressure tested, run tested under load and shipped operation ready
Options & Accessories
- Receivers for 90% refrigerant storage (heated and insulated for temperatures below
- 30°F ambient)
- Condenser coil coating for corrosion protection in coastal areas
- Fan speed control to maintain steady head pressure in cold ambient
- Voltage and phase monitor in 2 through 7.5 ton
- Cabinet mounted glycerin filled fluid supply pressure gauge
- Cabinet mounted, glycerin filled refrigeration pressure gauges
- Cabinet mounted, analog fluid inlet and outlet gauges
- Inhibited propylene glycol concentrate or 65% / 35% premix in 55 gallon drums or 5 gallon carboys
- Castors for portability
Electrical Data | ||
Power Supply: 460/3/60 | ||
Compressor: | LRA: | 45 Amps |
RLA: | 5.8 Amps | |
Fan Motor: | FLA: | 1 @ .4 Amps |
Pump Motor: | H.P. | .75 |
FLA: | 1.6 Amps | |
Total Circuit: | FLA: | 7.8 Amps |
MCA: | 9.75 Amps | |
MOP: | 15 Amps |
Physical Data | |
Dimensions: | 48”L x 35”W x 60”H |
Ship Weight: | 700 lbs. |
Minimum Clearances: | 30” All Sides 60” above Top |
Noise Rating: | 77 dBA @ 10 feet |
Fans CFM: | 2805 cfm @ 125°F |
Tank Capacity: | 26 Gallons ( Atmospheric ) |
Connections: | .75” FPT CHWS and CHWR |