2.0 Ton – CAVSS0201-TZ – 208-230/1/60
Standard Features
- U.L. Listed, and EPA Compliant, R410a refrigeration condensing unit complies with latest codes
- Single refrigeration circuit with Copeland scroll compressor with crankcase heater
- Air cooled, high ambient, vertical discharge, condenser for 100°F ambient;
- Fan cycle control provides head pressure control down to 0°F ambient
- Weather proof electrical panel with single point power connection to compressor contactor
- 24 vac control circuit with component sequenced terminal strip for easy troubleshooting
- Remote control panel with electronic thermostat, digital temperature indicator lighted switches
- Stainless steel brazed plate evaporators with hot gas bypass capacity control and solenoid valve
- Externally equalized thermal expansion valve with liquid line solenoid valve, filter drier, sight glass
- Copper water lines with FPT connections and insulated with 1/2” closed cell prevents condensation mess
- Water flow safety switch locks out compressor in no flow condition
- Internal bypass loop to return line prevents compressor deadheading
- Lifetime, polyethylene reservoir with cabinet mounted fill port and glass tube external level gauge
- High head, cast iron centrifugal pump with nominal capacity of 2.4 gpm/ton at 100 ft. hd.
- Cabinet mounted CHWS outlet pressure gauge and analog temperature gauge
- Powder coated welded steel frame with laminated polyethylene panels
- Warranty: One (1) ) year limited parts, five ( 5 ) years limited compressor warranty
- Leak checked, pressure tested and run tested under load prior to shipment
Options & Accessories
- Receivers for 90% refrigerant storage
- Heated and insulated receiver for ambient temperatures below 30°F
- Nonferrous piping in lieu of copper for de-ionized water or corrosive fluids
- Condenser coil coating for corrosion protection in coastal areas and caustic environments
- Cabinet mounted, glycerin filled refrigeration pressure gauges
- Sanitary, double wall, evaporator for potable water
- Inhibited propylene glycol concentrate in 55 gallon drums or 5 gallon carboys
- Closed system reservoir in lieu of open polyethylene
- Factory authorized technician for startup and training
- Factory authorized contractor for installation
- Castors for portability
Electrical Data | ||
Power Supply: 208-230/1/60 | ||
Compressor: | LRA: | 58.3 Amps |
RLA: | 12.8 Amps | |
Fan Motor: | FLA: | 1 @ .6 Amps |
Pump Motor | H.P | .75 |
FLA: | 7.6 Amps | |
Total Circuit: | FLA: | 21.0 Amps |
MOP: | 30 Amps |
Physical Data | |
Dimensions: | 33”L x 28”W x 60”H |
Ship Weight: | 960 lbs. |
Minimum Clearances: | 30” All Sides 60” above Top |
Noise Rating: | 88 dBA @ 10 feet |
Fans CFM: | 1700 cfm @ 125°F |
Tank Capacity: | 16 Gallons ( Atmospheric ) |
Connections: | .75” FPT CHWS and CHWR |